Robot
Складчик
- #1
[Udemy] Crash Course Electronics and PCB Design [Andre LaMothe]
- Ссылка на картинку
[Udemy] Crash Course Electronics and PCB Design (Andre LaMothe)
Crash Course Electronics was designed for one thing -- to take you from mystery to mastery in Electronics and PCB Design. This massive course was custom made for those interested in learning electronics from the ground up that wish to leverage that knowledge to build actual printed circuit boards (PCBs). There is no other course like this in existence that has the depth and breadth of Crash Course Electronics. The course starts with atomic physics and the electron, before you know it you are learning Ohm's Law, circuit analysis, AC, DC, complex impedance, RC and RL circuits, filters, amplifiers, transistors, FETs, analog and digital theory -- too much to list here!
But, unlike other courses that are highly technical and math based. Crash Course Electronics was designed to be taken as a journey with the instructor. Each lecture building on the last, each new concept like a new puzzle approached in many different ways. The most complex topics and mathematical concepts are distilled down into understandable lectures and we have a lot of fun doing it! I had to learn this stuff at one point and remember how hard it was, so I approach each lecture as if we are both learning for the first time and make no assumptions about what you know or don't know.
As we progress through the lectures, expect to see every circuit and idea worked out on the black board, virtually simulated (with Labcenter Proteus), and built by hand right in front of your eyes in high def, ultra clean video and audio. Not only will you learn all the theory and practical aspects of Electrical Engineering, but my 35+ years of experience with electronics will be downloaded to your brain with countless
real-world tips and tricks that will take you from a hobbyist to a deep understanding of the subject matter.
Then when we have all the basic electronic theory under our belts, buckle in for something you have never seen -- we will build, not one, not two, but three complete products! We will talk about the design, the motivation, look up parts, background information, and then design the circuits together like colleagues, lay them out in Altium CircuitMaker, route them, verify and produce manufacturing files. If that wasn't enough, we will take those files and go out on internet and send them to a number of online manufactures and get them ready for production, all you have to do is hit SUBMIT!
Last, but not least -- the course is based on my college text book "Design Your Own Video Game Console" aka "The Black Art of Video Game Console Design" -- this 800+ page book is included free of charge (the PDF version) with the course. Although, we won't be talking about game consoles in this course, we will be using the text for its theory, electrical engineering and PCB design chapters.
Чему вы научитесь:
- Students will be able to analyze and construct basic analog and digital circuits. As well as design printed circuit boards, assemble and get them running.
- Students will be able to leverage this knowledge to build and produce electronic products completely themselves.
- Students will be able to use numerous CAD and design tools such as schematic entry, PCB layout and routing, circuit simulators, MATLAB, and more.
- Students will learn how to use basic electronics lab equipment such as oscilloscopes, power supplies, signal generators, and more.
- Students will learn hands on techniques such as circuit construction with solderless breadboards, wire wrapping, and soldering.
Требования:
- A modern Windows PC (or VM) capable of running various CAD and design tools used in this course such as Altium CircuitMaker, Labcenter Proteus, Matlab, and more.
- A High School or equivalent understanding of mathematics.
- Since the course is about electronics, to get the full benefit of the course, you will need to follow along and build the circuits. Thus, access to breadboards, power supplies, tools, parts, etc.
- A lot of patience! This is a university level course with many 1 hour lectures. There's a lot of material to cover, and we are here to learn this cold, inside and out!
Для кого этот курс:
- Anyone interested in learning electronics and/or printed circuit board design.
- Programmers interested in learning about how the machines they code with actually work and the electronics inside them.
- Electrical or Computer Engineering students that would like to see what the major is all about end to end as a head start in their degree.
- Someone that is a hacker/hobbyist that has some experience with electronics, but wants to take it to the next level and obtain a much deeper understanding of electronics and circuit analysis/design.
Курс на английском языке
Crash Course Electronics was designed for one thing -- to take you from mystery to mastery in Electronics and PCB Design. This massive course was custom made for those interested in learning electronics from the ground up that wish to leverage that knowledge to build actual printed circuit boards (PCBs). There is no other course like this in existence that has the depth and breadth of Crash Course Electronics. The course starts with atomic physics and the electron, before you know it you are learning Ohm's Law, circuit analysis, AC, DC, complex impedance, RC and RL circuits, filters, amplifiers, transistors, FETs, analog and digital theory -- too much to list here!
But, unlike other courses that are highly technical and math based. Crash Course Electronics was designed to be taken as a journey with the instructor. Each lecture building on the last, each new concept like a new puzzle approached in many different ways. The most complex topics and mathematical concepts are distilled down into understandable lectures and we have a lot of fun doing it! I had to learn this stuff at one point and remember how hard it was, so I approach each lecture as if we are both learning for the first time and make no assumptions about what you know or don't know.
As we progress through the lectures, expect to see every circuit and idea worked out on the black board, virtually simulated (with Labcenter Proteus), and built by hand right in front of your eyes in high def, ultra clean video and audio. Not only will you learn all the theory and practical aspects of Electrical Engineering, but my 35+ years of experience with electronics will be downloaded to your brain with countless
Then when we have all the basic electronic theory under our belts, buckle in for something you have never seen -- we will build, not one, not two, but three complete products! We will talk about the design, the motivation, look up parts, background information, and then design the circuits together like colleagues, lay them out in Altium CircuitMaker, route them, verify and produce manufacturing files. If that wasn't enough, we will take those files and go out on internet and send them to a number of online manufactures and get them ready for production, all you have to do is hit SUBMIT!
Last, but not least -- the course is based on my college text book "Design Your Own Video Game Console" aka "The Black Art of Video Game Console Design" -- this 800+ page book is included free of charge (the PDF version) with the course. Although, we won't be talking about game consoles in this course, we will be using the text for its theory, electrical engineering and PCB design chapters.
Чему вы научитесь:
- Students will be able to analyze and construct basic analog and digital circuits. As well as design printed circuit boards, assemble and get them running.
- Students will be able to leverage this knowledge to build and produce electronic products completely themselves.
- Students will be able to use numerous CAD and design tools such as schematic entry, PCB layout and routing, circuit simulators, MATLAB, and more.
- Students will learn how to use basic electronics lab equipment such as oscilloscopes, power supplies, signal generators, and more.
- Students will learn hands on techniques such as circuit construction with solderless breadboards, wire wrapping, and soldering.
Требования:
- A modern Windows PC (or VM) capable of running various CAD and design tools used in this course such as Altium CircuitMaker, Labcenter Proteus, Matlab, and more.
- A High School or equivalent understanding of mathematics.
- Since the course is about electronics, to get the full benefit of the course, you will need to follow along and build the circuits. Thus, access to breadboards, power supplies, tools, parts, etc.
- A lot of patience! This is a university level course with many 1 hour lectures. There's a lot of material to cover, and we are here to learn this cold, inside and out!
Для кого этот курс:
- Anyone interested in learning electronics and/or printed circuit board design.
- Programmers interested in learning about how the machines they code with actually work and the electronics inside them.
- Electrical or Computer Engineering students that would like to see what the major is all about end to end as a head start in their degree.
- Someone that is a hacker/hobbyist that has some experience with electronics, but wants to take it to the next level and obtain a much deeper understanding of electronics and circuit analysis/design.
Курс на английском языке
